Trex Custom Panels

Trex Seclusions® – Custom Panel

All Trex gates (standard & custom) contain a fully welded, galvanized internal steel frame.

Custom gates are available in fixed width openings: 46 ¼” for single gates and 130 ½” for double gates (combination color gates can be built in custom sizes)


Trex Single & Double Arch Spindle Top Gates


Trex Single & Double Arch Top Gates

Trex Single & Double Flat Spindle Top Gates

Trex Small & Large Mid-Rail Gate Panels

Trex Sunburst and Trex Color Combination Gates

Trex Gate Description:

Trex Custom Gates are a signature series of designs from CFC Distributors. These styles are popular variations on the standard style. Other customizations may be available if details can be provided for review.

Among the custom designs are:

  • Semi-privacy with Trex or metal spindles
  • Privacy or semi-privacy arch top
  • Sunburst
  • Mid-Rail
  • Non standard sizes / angled frames
  • Color combinations (Saddle, Winchester Grey, Woodland Brown)

Each gate panel is shipped individually boxed with up to three gates to a pallet.

Calculating Gate Opening:

Standard gate panels are 70 ¼” tall. They are built for a 72” tall fence allowing a 1 ¾” clearance underneath.

The optimal single gate opening for standard gate panels are 46 ¼” or 65 ¾”. This allows for a 1 ⅞” gap for the hardware (the minimum required allowance is 1 ¼ “; the maximum allowance is 2 ¾”).

The optimal double gate opening for standard gate panels is 91 ½” (for two small panels) and 130 ½” (for two large panels) or 111” (for one small panel and one large panel). This allows for a 2 ¾” gap for hardware (the minimum required allowance is 1 ¾”; the maximum allowance is 4 ¼”).

If the desired gate opening does not fall within the required parameters above a custom gate panel must be ordered. Use these formulas to calculate panel size.

Height: Fence Height – 1 ¾” (for clearance) = Panel Height (for example: 72” – 1 ¾” = 70 ¼”)

Single Gate Width: Gate opening – 1 ⅞” = Panel Size (for example: 40” – 1 ⅞” = 38 ⅛”)

Double Gate Width: (Gate opening – 2 ¾”) ÷ 2 = Panel Size (for example: (120” – 2 ¾”) ÷ 2 = 117 ¼”)

• The suggested gap size is the minimum necessary that will still allow for adjustability.

• To block the view of a gap on the latch and/or hinge posts, a Trex 2×2 baluster should be attached to the gate post on the opposite side of swing.